Harris® 0 PhosCopper Brazing Alloy

 

Harris 0 is a low cost alloy that is suitable for most copper-to-copper or brass joints where close tolerance can be maintained.

Features

• Economical choice for copper brazing
• Copper is self-fluxing
• Alloy flows quickly at brazing temperature so requires close joint tolerance (less than 0.005 )
• Primarily used in manual brazing applications
• Also a suitable for brazing brass
• Operators should avoid over heating the brass and use Stay Silv® white brazing flux
• Not recommended for brazing steel or other ferrous base metals
• Should not use Harris 0 if braze is exposed to sulfur or sulfur compounds in service
• Recommended joint clearance of .002 -.007
• Conforms to the EU Reach & RoHS directive

• Typical Applications

  • Copper-to-copper joint brazing
    
  • Brass joint brazing

  • Technical Specs

    • Solidus 1310ºF (710°C)
    • Liquidus 1460°F (793°C)
    • Brazing Range 1345°F- 1500°F (730°C -816°C)
    • AWS A5.8 BCuP-2
    • ASME Section IIC SFA 5.8 BCuP-2
    • ISO 17672 CuP 181

    • Download Tech Sheet

      Options:

      • .050 x 1 8 Flat Sticks – 28 Per Tube – 5620F1
      • 3 32 x 24 Round Sticks (Rods) – 24 Per Tube – 0520R1
      • 1 8 x 20 Round Sticks (Rods) – 25lb Box – 0620R
      • Other diameters and package sizes available upon request
      •