-
$414 $207
Lincoln Electric Lincore® 15CrMn Self Shielded Flux Cored Wire Flux-Cored Build Up and Hardfacing Self-Shielded MIG Wire (FCAW-S) LINCORE® 15CRMN provides an austenitic manganese deposit which exhibits very good crack resistance ideal for open arc mode for joining austenitic manganese steel to carbon steel, low alloy steel, austenitic manganese steel, or stainless steel offers unlimited…
-
$166.80 $83.40
Lincoln Electric Lincore® 50 Flux-Cored Hardfacing Self-Shielded MIG Wire (FCAW-S) Iron-based chromium carbide alloys designed for applications subject to abrasion accompanied by impact from rock, ore, clay, sand or cement, including digging or crusher surfaces or parts that must maintain sharp cutting edges. This product can be applied in multiple layers and may cross check crack….
-
$691.60 $207.48
Lincoln Electric Lincore® 60-O Self Shielded Flux Cored Welding Wire Flux-Cored Severe Abrasion Self-Shielded MIG Wire (FCAW-S) LINCORE® 60-O ideal for carbon, low alloy, manganese, stainless steels and cast iron to be used at temperatures up to 704°C (1300°F) deposits feature higher alloy levels than to resist both abrasion and moderate impact limited to two…
-
$304.80 $152.40
Lincoln Electric Lincore® BU Flux-Cored Build Up Self-Shielded Welding Wire (FCAW-S) Lincore® BU Flux-Cored Wire delivers non-severe metal-to-metal wear with outstanding crack resistance. Provides a tough machinable deposit for build-up or final overlay, Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and or build-up material. Features Provides a tough…
-
$383.90 $191.95
Lincoln Electric Lincore® M Flux-Cored Build Up Self-Shielded Welding Wire (FCAW-S) for BuildUp and Repair of Manganese and Carbon Steels LINCORE® M Flux-Cored Self-Shielded Wire produces an austenitic manganese deposit on hammers, dredge parts, crushers, breaker bars and buckets applications. (Build Up and Joining) LINCORE® M ideal for build-up and repair of Hadfield-type austenitic manganese…
-
$1,122 $336.60
Rockmount Apollo® FC – Self-Shielded Wearfacing Wire For welding low alloy and manganese steels, buildup, wear surfacing and joining Apollo Flux Core is a self shielded high manganese alloy wire. It is the welder’s choice for the tough buildup jobs, and for joining manganese to manganese or manganese to low alloy steels. Apollo Flux Core…
-
$479.50 $239.75
Rockmount Olympia® B Flux Core Hard Facing MIG Wire For hardfacing, to resist abrasion on carbon steels, alloy steels, cast iron and manganese. One of the most popular hardfacing products. The exceptionally high alloy content produces superior hardness of 62-65RC and holds its hardness to 1200oF. Excellent out of position characteristics, and high recovery rate ensures…
-
$1,052 $315.60
Rockmount Omega® FC Flux Core Hard Facing MIG Wire For hardfacing all ferrous metals requiring excellent abrasion resistance under impact. Omega Flux Core is a self-shielded general purpose hardfacing wire. Its exceptionallyhigh chrome content provides resistance to the combined forces of abrasion and impact. Omega Flux Core has great versatility and exhibits excellent running characteristicswith a…
-
$165 $82.50
Stoody 965-G Gas Shielded Hardfacing Wire 0.035 (0.9 mm), 5lb (2.27 kg) Plastic layer-wound spool Stoody 965-G is a general purpose hardfacing alloy that offers a good balance of impact and abrasion resistance. It can be used in both metal-to-metal and metal-to-earth applications. Deposits are martensitic and forgeable but not readily machinable. 965-G can be applied…
End of content
End of content