-
$106 $53
Gasflux® Type W Liquid Flux Universal liquid flux for both silver and bronze brazing. Type W is suitable with almost all applications for the brazing of copper, brass, steel, stainless steel, cast iron and carbide. Liquid Gasflux® consists of a specially compounded liquid-type flux that is automatically introduced into the fuel gas Manufactured under rigid…
-
$22 $11
Harris #17 Flux Paste – 8oz. Jar This is a premium-quality water and salt paste flux. It is active within a temperature range of 1400F to 2200F. The flux was developed to produce exceptional capillary flow qualities for nickel-silver and bronze alloys. The residue is easily removed with warm water. If flux becomes hard, add…
-
$23.60 $11.80
Harris #600 Flux Powder – 1lb. Can 600 brazing flux is an all-purpose powder flux for use with bronze alloys such as Welco 15. This highly active flux can be used dry by dipping the heated rods into the powder or mixing with water. Residues may be removed with a hot water rinse leaving a…
-
$39.80 $19.90
Harris Al-Braze EC Aluminum Brazing Flux A powdered flux for use with aluminum brazing alloys. Use with Al-Braze 1070, 4047 (718) aluminum may be mixed with water or alcohol to form a paste. Sold in quantity of 1 2 lb. Download Spec Sheet
-
$103.40 $51.70
Harris Solar Flux – Type B – 1lb. Can Solar Flux is a complex chemical compound in the form of a very fine powder. Solar Flux is mixed with alcohol (methanol methyl alcohol preferred) and brushed on the weld joint. It is formulated to shield the back of the weld joint from oxygen, dissipate heat…
-
$10.80 $5.40
Harris Stay-Clean® Liquid Soldering Flux General Purpose Liquid FluxA general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder. Typical Application: Used for soldering virtually all metals, except aluminum, magnesium or titanium. Not recommended for use in electrical or electronic applications. Options: 4 oz bottle 16…
-
$8.60 $4.30
Harris Stay-Clean® Soldering Paste Flux Designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay Clean Paste flux works well with most leaded and lead-free tin solder…
-
$16.60 $8.30
Harris Stay-Silv® Black Paste Brazing Flux All Purpose Hi-Temp Brazing Flux Stay-Silv black brazing flux is an all-purpose, high-temperature, paste flux for use in silver brazing. It is formulated for applications where the work is subjected to rapid, localized heating or where longer brazing times are encountered. It is particularly useful in applications where large…
-
$25.30 $12.65
Harris Stay-Silv® Powder Brazing Flux General Purpose Brazing Flux An all-purpose, white powder flux, similar to the white paste flux but in a dry powder mixture. It is typically applied by heating the braze rod end and dipping it into the flux. The flux will adhere to the heated rod. It can be used in…
-
$165.60 $82.80
Harris Stay-Silv® White Silver Brazing Flux Stay-Silv® white brazing flux is an all-purpose, low-temperature flux for use in silver brazing. It is formulated to provide smooth flux application, even coverage and excellent protection during braze heating cycles. It can be used with most ferrous and non-ferrous metals other than aluminum, magnesium or titanium. Ideal…
-
$22.90 $11.45
Lucas Milhaupt Handy Flux – All-Purpose Brazing Flux 1 lb Jar Handy Flux is a water based active flux which is used in open air brazing for both ferrous and non-ferrous metals to promote oxide removal. 1 lb (454 g) Good part adhesion All-purpose flux Made in the USA Classifications: AMS: 3410, AWS: FB3A Industry…
-
$26.90 $13.45
Muggy Weld SSF-6 Paste Flux Replacement 1 oz container paste flux for use with SSF-6 High Strength 56% Silver Solder Key Features: Can be applied with: propane, MAPP gas, oxyacetylene Works synergistically with SSF-6, for those who require additional flux Non-corrosive 2 year shelf life Options: 1oz Replacement Jar – SSF6FLUX SSF-6 Product Instructions
-
$25.90 $12.95
Muggy Weld Super Alloy 1 Liquid Flux Replacement 1 oz container liquid flux for use with Super Alloy 1 multi-metal and pot metal solder. Key Features: Can be applied with: propane, MAPP gas, oxyacetylene Works synergistically with Super Alloy 1 rod Turns root beer brown when the base metal reaches 350°F, acting as an absolute temperature guide Non-corrosive…
-
$26.90 $13.45
Muggy Weld Super Alloy 5 Powder Flux Replacement 1 oz container powder flux for use with Super Alloy 5 aluminum welding and brazing rod Can be applied with: propane, MAPP gas, oxyacetylene Works synergistically with Super Alloy 5 rod to bond through residual paint, oil grease etc Turns liquid when the base metal reaches 600°F, acting…
End of content
End of content