Adjust-O™ Magnet Squares Adjustable from 30º – 275º with two On Off switches. Machined flat surfaces and nickel chrome body. V-Groove surfaces securely hold round and square tubing, angle, and flat stock. Max. Pull Force (lb) – 110 Dimension (in) – 7.8 x 7.8 x 3.8
Adjust-O™ Magnet Squares The fast & easy way to hold metal workpieces at 30° 60°, 45°, and 90°. Turn the magnet Off or at the mid-point position when setting up, turn On when you’re ready to work. Fast and safe set-up! Ideal for round and square tubing, angle, and flat stock. Easy to clean. Simply turn Off and wipe. Part No. Max….
Bend Press Benchtop Press Brake, 20 ton, Deluxe Kit 4-Way V-Die Included Bend Press Benchtop Press Brake, 20 ton, Deluxe Kit is the perfect solution for the fabricator needing to bend small sections of sheet metal as well as heavy plate steel. Utilizing a common 20-ton bottle jack, this press requires no outside power…
Inside Outside Angle Magnets Hold stock from the outside when inside access is difficult. Hold and position sheet metal, round pipes, square, angled or flat stock. The Inside Outside Angle Magnets are constructed from two independent rectangular magnets for consistent, undiminished magnetic force when both sides are attached to workpieces. Use hex hole on…
MagHold 4 piece V-Pad Kit – MVDF44 Magnets on both pad face and the bottom. Light duty & tight spot holding! Build, Hold, and Position Steel. Hold and position round, flat, and square parts in light duty substructure applications! Part No. Description Weight MVDF44 2 pcs. 2″ V-Pads (XDV4)2 pcs. 2.2″ V-Pads (XFV4) 0.9 LB(0.4 kg)
MagTab Large with Replaceable Magnets Stronger for larger parts! Hold tabs, gussets, plates and odd shaped pieces in position for tack welding. Part No. Description Max. Pull Force Dimension Weight MNT15 MagTab Large with Replaceable Magnets 80 LBS(36 kg) 5.2 x 4.5 x 2.8″(132 x 114 x 71 mm) 1 LB(0.5 kg)
MagTab Pro X-Large with Replaceable Magnets – MPT18 More magnetic force, and a heavy duty build for larger tabs and metal pieces. Designed and build from a single piece of cast aluminum, the MagTab PRO provides solid and sturdy magnetic holding of tabs in larger applications. Replaceable Magnets: MagTab PRO features fully replaceable magnets that…
Portaband Pro Deluxe Kit for Dewalt DWM120 SAW NOT INCLUDED. The Portaband Pro PBP-DEWALT fits the DeWalt Bandsaw DWM120 only. (Be sure to check that you have compatible model number!) Portaband Pro is the only bandsaw holding device that turns your Portable Bandsaw into a Chop Saw AND an Upright Bandsaw. It easily attaches to your bandsaw without having to remove…
Portaband Pro Deluxe Kit for Milwaukee 6232, 6238 and 2729 SAW NOT INCLUDED. Portaband Pro PBP-MILWAUKEE fits the Milwaukee Deep Cut Portable Bandsaw #6232, 6238 (corded), #2729 (cordless) models only. (Be sure to check that you have compatible model number!) Portaband Pro is the only bandsaw holding device that turns your Portable Bandsaw into a Chop Saw AND an Upright…
Replaceable Pads for Strong Hand Clamps Spring-loaded standard pads for light & medium duty clamps. Heavy Duty Replacement joints and pads for UG, UM & UP clamps. Specifications: Part No. For U-Clamps Series Dimensions (in) Weight (lb) XDP UB, UD Series Ø1.0 x 0.5 .05 XFP UE, UF Series Ø1.2 x 0.5 .09 XGP…
Small Diameter Pipe Pliers PGT621 Small Diameter Pipe Pliers are the convenient way to hold small round pipes for: Butt-welding and Cross joints. Part No. Throat Depth (in) MAX Clamping Capacity (in) Thread Overall Length (in) Weight (lb) PGT621 2.0 0.3 ~ 1.5 M8 6.0 0.8 _ –>
Strong Hand 300 Amp Magnetic Ground Features: The PowerBase™ Grounding Magnet sets up quickly and easily. Powerful rare earth magnet delivers heavy duty holding power. The “V” machined surface grips round parts. Copper connector stud allows for better conductivity. Part No. Amperage Dimension (mm) Magnetic Force (kg) Weight (kg) GM203 300A @ 60% Duty Cycle…
Strong Hand 4-in-1 Clamp Accessory Packs Convert Utility Clamps into 4-IN-1 Clamps. Includes a V-pad, an Extender Block, and a screw. Every Package includes one V-Pad and one Extender Block. (Mounting Screw included.) Mount the V-Pad or Extender Block on the tapped hole of the Utility Clamp to create your 4-IN-1 kit. Part No….
Adjust-O™ 90° Dual Switch Magnet Squares For professional jobs that demand strong hold down forces. Holds flat and round metal work pieces. Two On Off switches for independent operation. Turn the magnets Off when setting up, turn On when you’re ready to work. Easy and safe set-up! Machined flat and V-surfaces are ideal for…
Strong Hand Large Capacity Big Mouth Pliers Four Adjustment Slots – Large Capacity (up to 3″)! Unique crank handle for FAST opening, closing and in-situ pressure adjustment. Serrated jaw surfaces for extra gripping power. V-Notch on top jaw for holding small parts. Long jaw (2-1 2”) for extra capacity and greater versatility in workholding….